| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw in the binding process of Govee’s cloud platform and devices allows a remote attacker to bind an existing, online Govee device to the attacker’s account, resulting in full control of the device and removal of the device from its legitimate owner’s account.
The server‑side API allows device association using a set of identifiers: "device", "sku", "type", and a client‑computed "value", that are not cryptographically bound to a secret originating from the device itself.
The vulnerability has been verified for the Govee H6056 - lamp device in firmware version 1.08.13, but may affect also other Govee cloud‑connected devices. The vendor is investigating other potentially affected models.
The vendor has deployed server-side security enhancements and automatic firmware updates for model H6056. Most of H6056 devices have been successfully patched through automatic updates. Remaining H6056 users with upgradeable hardware versions must manually update firmware through the Govee Home app while keeping their device WiFi-connected. Users should open the Govee Home app, tap their H6056 device card to enter the device details page, tap the settings icon in the upper right corner, navigate to Device Information section (Firmware Version), and tap the Update button to install the security patch immediately.
Govee H6056 devices with hardware versions 1.00.10 or 1.00.11 cannot receive firmware update due to hardware limitations. |
| Unified Remote 3.9.0.2463 contains a remote code execution vulnerability that allows attackers to send crafted network packets to execute arbitrary commands. Attackers can exploit the service by connecting to port 9512 and sending specially crafted packets to open a command prompt and download and execute malicious payloads. |
| A vulnerability in the handling of verify_mode = CERT_REQUIRED in the wolfssl Python package (wolfssl-py) causes client certificate requirements to not be fully enforced.
Because the WOLFSSL_VERIFY_FAIL_IF_NO_PEER_CERT flag was not included, the behavior effectively matched CERT_OPTIONAL: a peer certificate was verified if presented, but connections were incorrectly authenticated when no client certificate was provided.
This results in improper authentication, allowing attackers to bypass mutual TLS (mTLS) client authentication by omitting a client certificate during the TLS handshake.
The issue affects versions up to and including 5.8.2. |
| Johnson Controls Metasys component listed below have Improper Neutralization of Special Elements used in a Command (Command Injection) Vulnerability . Successful exploitation of this vulnerability could allow remote SQL execution This issue affects
* Metasys: Application and Data Server (ADS) installed with SQL Express deployed as part of the Metasys 14.1 and prior installation,
* Extended Application and Data Server (ADX) installed with SQL Express deployed as part of the Metasys 14.1 installation,
* LCS8500 or NAE8500 installed with SQL Express deployed as part of the Metasys installation Releases 12.0 through 14.1,
* System Configuration Tool (SCT) installed with SQL Express deployed as part of the SCT installation 17.1 and prior,
* Controller Configuration Tool (CCT) installed with SQL Express deployed as part of the CCT installation 17.0 and prior. |
| A binding to an unrestricted IP address vulnerability was discovered in Productivity Suite software version v4.4.1.19. The vulnerability allows an unauthenticated remote attacker to interact with the ProductivityService PLC simulator and read, write, or delete arbitrary files and folders on the target machine |
| Milvus is an open-source vector database built for generative AI applications. An unauthenticated attacker can exploit a vulnerability in versions prior to 2.4.24, 2.5.21, and 2.6.5 to bypass all authentication mechanisms in the Milvus Proxy component, gaining full administrative access to the Milvus cluster. This grants the attacker the ability to read, modify, or delete data, and to perform privileged administrative operations such as database or collection management. This issue has been fixed in Milvus 2.4.24, 2.5.21, and 2.6.5. If immediate upgrade is not possible, a temporary mitigation can be applied by removing the sourceID header from all incoming requests at the gateway, API gateway, or load balancer level before they reach the Milvus Proxy. This prevents attackers from exploiting the authentication bypass behavior. |
| An Use of Hard-coded Credentials vulnerability has been identified in Moxa’s network security appliances and routers. The system employs a hard-coded secret key to sign JSON Web Tokens (JWT) used for authentication. This insecure implementation allows an unauthenticated attacker to forge valid tokens, thereby bypassing authentication controls and impersonating any user. Exploitation of this vulnerability can result in complete system compromise, enabling unauthorized access, data theft, and full administrative control over the affected device. While successful exploitation can severely impact the confidentiality, integrity, and availability of the affected device itself, there is no loss of confidentiality or integrity within any subsequent systems. |
| A vulnerability was found in Belkin F9K1009 and F9K1010 2.00.04/2.00.09 and classified as critical. Affected by this issue is some unknown functionality of the component Web Interface. The manipulation leads to hard-coded credentials. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in TRENDnet TI-G160i, TI-PG102i and TPL-430AP up to 20250724. This affects an unknown part of the component SSH Service. The manipulation leads to use of default credentials. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The vendor explains: "For product TI-PG102i and TI-G160i, by default, the product's remote management options are all disabled. The root account is for troubleshooting purpose and the password is encrypted. However, we will remove the root account from the next firmware release. For product TPL-430AP, the initial setup process requires user to set the password for the management GUI. Once that was done, the default password will be invalid." |
| A vulnerability was identified in Docker Desktop that allows local running Linux containers to access the Docker Engine API via the configured Docker subnet, at 192.168.65.7:2375 by default. This vulnerability occurs with or without Enhanced Container Isolation (ECI) enabled, and with or without the "Expose daemon on tcp://localhost:2375 without TLS" option enabled.
This can lead to execution of a wide range of privileged commands to the engine API, including controlling other containers, creating new ones, managing images etc. In some circumstances (e.g. Docker Desktop for Windows with WSL backend) it also allows mounting the host drive with the same privileges as the user running Docker Desktop. |
| PyVista provides 3D plotting and mesh analysis through an interface for the Visualization Toolkit (VTK). Version 0.46.3 of the PyVista Project is vulnerable to remote code execution via dependency confusion. Two pieces of code use`--extra-index-url`. But when `--extra-index-url` is used, pip always checks for the PyPI index first, and then the external index. One package listed in the code is not published in PyPI. If an attacker publishes a package with higher version in PyPI, the malicious code from the attacker controlled package may be pulled, leading to remote code execution and a supply chain attack. As of time of publication, a patched version is unavailable. |
| The affected product does not limit the number of attempts for inputting
the correct PIN for a registered product, which may allow an attacker
to gain unauthorized access using brute-force methods if they possess a
valid device serial number. The API provides clear feedback when the
correct PIN is entered. This vulnerability was patched in a server-side
update on April 6, 2025. |
| XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. Starting in version 4.3-milestone-1 and prior to versions 16.10.9, 17.4.2, and 17.5.0, the REST search URL is vulnerable to HQL injection via the `orderField` parameter. The specified value is added twice in the query, though, once in the field list for the select and once in the order clause, so it's not that easy to exploit. The part of the query between the two fields can be enclosed in single quotes to effectively remove them, but the query still needs to remain valid with the query two times in it. This has been patched in versions 17.5.0, 17.4.2, and 16.10.9. No known workarounds are available. |
| RomM (ROM Manager) allows users to scan, enrich, browse and play their game collections with a clean and responsive interface. In versions 4.0.0-beta.3 and below, an authenticated arbitrary file write vulnerability exists in the /api/saves endpoint. This can lead to Remote Code Execution on the system. The vulnerability permits arbitrary file write operations, allowing attackers to create or modify files at any filesystem location with user-supplied content. A user with viewer role or Scope.ASSETS_WRITE permission or above is required to pass authentication checks. The vulnerability is fixed in version 4.0.0-beta.4. |
| dag-factory is a library for Apache Airflow® to construct DAGs declaratively via configuration files. In versions 0.23.0a8 and below, a high-severity vulnerability has been identified in the cicd.yml workflow within the astronomer/dag-factory GitHub repository. The workflow, specifically when triggered by pull_request_target, is susceptible to exploitation, allowing an attacker to execute arbitrary code within the GitHub Actions runner environment. This misconfiguration enables an attacker to establish a reverse shell, exfiltrate sensitive secrets, including the highly-privileged GITHUB_TOKEN, and ultimately gain full control over the repository. This is fixed in version 0.23.0a9. |
| The Control-M/Agent is vulnerable to unauthenticated remote code execution, arbitrary file read and write and similar unauthorized actions when mutual SSL/TLS authentication is not enabled (i.e. in the default configuration).
NOTE:
* The vendor believes that this vulnerability only occurs when documented security best practices are not followed. BMC has always strongly recommended to use security best practices such as configuring SSL/TLS between Control-M Server and Agent.
* The vendor notifies that Control-M/Agent is not impacted in Control-M SaaS |
| xrpl.js is a JavaScript/TypeScript API for interacting with the XRP Ledger in Node.js and the browser. Versions 4.2.1, 4.2.2, 4.2.3, and 4.2.4 of xrpl.js were compromised and contained malicious code designed to exfiltrate private keys. Version 2.14.2 is also malicious, though it is less likely to lead to exploitation as it is not compatible with other 2.x versions. Anyone who used one of these versions should stop immediately and rotate any private keys or secrets used with affected systems. Users of xrpl.js should pgrade to version 4.2.5 or 2.14.3 to receive a patch. To secure funds, think carefully about whether any keys may have been compromised by this supply chain attack, and mitigate by sending funds to secure wallets, and/or rotating keys. If any account's master key is potentially compromised, disable the key. |
| Path traversal vulnerability exists in RICOH Streamline NX V3 PC Client versions 3.5.0 to 3.242.0. If this vulnerability is exploited, arbitrary code may be executed on the PC where the product is running by tampering with specific files used on the product. |
| Various Ruijie Gateway EG and NBR models firmware versions 11.1(6)B9P1 < 11.9(4)B12P1 contain a code execution vulnerability in the EWEB management system that can be abused via front-end functionality. Attackers can exploit front-end code when features such as guest authentication, local server authentication, or screen mirroring are enabled to gain access or execute commands on affected devices. Exploitation evidence was first observed by the Shadowserver Foundation on 2025-02-05 UTC. |
| Denver SHC-150 Smart Wifi Camera contains a hardcoded telnet credential vulnerability that allows unauthenticated attackers to access a Linux shell. Attackers can connect to port 23 using the default credential to execute arbitrary commands on the camera's operating system. |
