| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN
When exchanging two full-file ranges, xmi_can_exchange_reflink_flags()
can move the reflink inode flag from the file that currently has it to
the other file, as long as exactly one side is marked. This assumes
that the file contents, and therefore all shared extents, are exchanged.
That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set.
xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings
from file1, so an exchange can complete without moving every mapping
that the earlier flag-swap decision accounted for. In that case the
post-operation cleanup can clear the reflink flag from an inode that
still owns shared written extents. Later writes then take the
non-reflink write path and may update blocks that should still have
been protected by CoW, which shows up as data corruption between
reflink-related files.
Fix this by disabling the reflink flag exchange whenever
XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still
proceed; the conservative outcome is that both inodes keep the reflink
flag. The regular reflink flag cleanup path can drop the extra flag
later once the inode no longer has shared extents. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_printer: take kref only for successful open
printer_open() returns -EBUSY when the character device is already
open, but it increments dev->kref regardless of the return value. VFS
does not call ->release() for a failed open, so every rejected second
open permanently leaks one reference.
Move kref_get() into the successful-open branch. |
| Ollama fails to validate redirect destinations when pulling tensor-layer models, allowing unauthenticated attackers to redirect blob downloads to arbitrary hosts. An attacker can control a registry, serve a malicious tensor-layer manifest, and cause the server to issue GET requests to internal hosts including cloud metadata endpoints. |
| AVideo through commit c91b5975d contains a server-side request forgery vulnerability in the EPG parser that allows authenticated uploaders to fetch arbitrary internal URLs. An attacker can supply an internal URL via the epg_link parameter during video upload, which is validated only for syntax and later fetched server-side during EPG generation without SSRF protection checks. |
| LiteLLM is a proxy server (AI Gateway) to call LLM APIs in OpenAI (or native) format. Prior to versions 1.88.6 and 1.96.2, any authenticated LiteLLM proxy user could redirect an outbound provider call to a destination the user controls and cause the proxy to send its configured provider credentials to that destination. Request validation in litellm/proxy/auth/auth_utils.py, litellm/proxy/common_request_processing.py, litellm/proxy/health_endpoints/_health_endpoints.py, litellm/proxy/image_endpoints/endpoints.py, and litellm/proxy/litellm_pre_call_utils.py used incomplete checks that did not cover every sensitive parameter or inspect equivalent values across nested request fields, path values, and bracket-notation form data. Routing and credential parameters including api_base, base_url, model_list, fallbacks, and litellm_credential_name could therefore be applied without clearing the operator's stored key, exposing upstream provider credentials and other configured secrets and permitting server-side requests to internal services reachable by the proxy. This issue is fixed in versions 1.88.6 and 1.96.2. |
| openssl_encrypt versions before 1.4.9 contain a weak key derivation vulnerability in the D-Bus CryptoService.EncryptFile handler that uses unstretched SHA-256 instead of Argon2id. Attackers can perform offline password guessing against encrypted files roughly six to seven orders of magnitude faster than documented protection by exploiting the missing key stretching and hash rounds. |
| openssl_encrypt versions before 1.4.9 derive the remote-pepper wrap key using unsalted HKDF-SHA256 or bare SHA-256 of the password, allowing identical keys across all users and files. Attackers with access to wrapped pepper blobs can precompute a single dictionary table and perform fleet-wide offline password guessing at hardware speed to recover user passwords. |
| A Server-Side Request Forgery and supply chain flaw was found in the OpenShift Console Helm catalog proxy. A namespace tenant can plant a ProjectHelmChartRepository with an arbitrary URL that the console pod fetches server-side, bypassing tenant egress restrictions. Combined with catalog metadata poisoning and admin-mediated chart installation, this enables privilege escalation. |
| An authenticated SSRF flaw was found in the OpenShift Console Dev Console webhook helpers. User-supplied target URLs are fetched server-side without validation, with path neutralization enabling arbitrary endpoint targeting and full response reflection from the console pod's privileged network position. |
| Editor Server Side Request Forgery (SSRF) in Broken Link Checker <= 2.4.14 versions. |
| n8n versions before 2.34.1 contain a server-side request forgery vulnerability in the legacy request helper function exposed to Code and Function nodes. The validation logic checks the uri property for SSRF safety while the underlying HTTP client uses the url property when both are present, allowing attackers to bypass validation by supplying a safe uri alongside a malicious url to access internal addresses. |
| Server-Side Request Forgery (SSRF) vulnerability in the /ocsreports/?function=tele_activate endpoint due to insufficient validation of the HTTPS_SERV and FILE_SERV parameters. An authenticated user with operator privileges can provide arbitrary values for these parameters, causing the OCS Inventory server to make HTTP/HTTPS requests to external systems or internal resources, which could allow access to internal network services or metadata resources of cloud services. |
| Dell PowerProtect Data Manager, versions 20.2.0.0 and below, contain a Server-Side Request Forgery (SSRF) vulnerability in the REST API. A high privileged remote attacker could potentially exploit this vulnerability, leading to Information disclosure. |
| BIG-IP has a vulnerability where an authenticated user of any role may be able to create administrative user accounts through an undisclosed request to Traffic Management User Interface (TMUI).
Impact:
This vulnerability may allow an authenticated attacker with network access to the BIG-IP management interface to escalate privileges by creating administrative accounts on the BIG-IP system. There is no data plane exposure; this is a control plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Kestra is an open-source, event-driven orchestration platform. Prior to 1.0.45 and 1.3.21, AuthenticationFilter in Kestra OSS uses request.getPath().endsWith("/configs") to whitelist the public configuration endpoint from Basic Auth. Because the check is a suffix match rather than an exact path match, any API path whose last segment is configs bypasses authentication entirely. An unauthenticated remote attacker can exploit this to create and execute arbitrary workflows without credentials. Because Kestra ships with script execution plugins (plugin-script-shell, plugin-script-python, etc.) enabled by default, this directly results in unauthenticated Remote Code Execution as root inside the Kestra worker container. This vulnerability is fixed in 1.0.45 and 1.3.21. |
| In Eclipse Ditto versions 3.0.0 to 3.9.6, the Things service fetches WoT (Web of Things) ThingModels over HTTP from URLs supplied by API users in the definition field of a Thing or Feature, without validating the target host, and follows HTTP redirects without re-validating the redirect target and without a hop limit. An authenticated user who is permitted to create a Thing, or who holds WRITE permission on an existing Thing, can thereby cause the Things service to issue arbitrary HTTP GET requests from inside the deployment's network — including to cloud instance-metadata endpoints and other internal services — and can use the differing error responses returned to the caller to enumerate internal services. Versions 2.4.0 to 2.5.x contain the same code, but are only affected where the operator explicitly enabled the WoT integration feature toggle, which is disabled by default in those versions. |
| Wyoming before 1.10.2 contains a server-side request forgery vulnerability that allows unauthenticated attackers with network access to force outbound connections to arbitrary targets by supplying a malicious `uri` query parameter to the HTTP API. Attackers can pass arbitrary `tcp://` or `unix://` URIs to affected endpoints including /api/info, /api/speech-to-text, and /api/text-to-speech to override the server-configured backend and redirect connections to attacker-chosen hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio->private handling in netfs_perform_write()
Under some circumstances, netfs_perform_write() doesn't correctly
manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing
to a group and pointing to a netfs_folio struct, leading to potential
multiple attachments of private data with associated folio ref leaks and
also leaks of netfs_folio structs or netfs_group refs.
Fix this by consolidating the place at which a folio is marked uptodate in
one place and having that look at what's attached to folio->private and
decide how to clean it up and then set the new group. Also, the content
shouldn't be flushed if group is NULL, even if a group is specified in the
netfs_group parameter, as that would be the case for a new folio. A
filesystem should always specify netfs_group or never specify netfs_group.
The Sashiko auto-review tool noted that it was theoretically possible that
the fpos >= ctx->zero_point section might leak if it modified a streaming
write folio. This is unlikely, but with a network filesystem, third party
changes can happen. It also pointed out that __netfs_set_group() would
leak if called multiple times on the same folio from the "whole folio
modify section". |
| Smarty is a template engine for PHP, facilitating the separation of presentation (HTML/CSS) from application logic. Prior to 4.5.7 and 5.8.2, depending on the release line, Smarty's {fetch} handling in libs/plugins/function.fetch.php and src/FunctionHandler/Fetch.php used Security::isTrustedUri() to validate only the initial remote URL against trusted_uri when a security policy was active. For resources handled by file_get_contents(), including HTTPS URLs, PHP followed HTTP redirects by default. An attacker who could supply or influence a fetch target and had an open redirect on a trusted host could redirect the request to an attacker-chosen internal endpoint, bypass the trusted_uri allowlist, and perform server-side request forgery. This issue is fixed in versions 4.5.7 and 5.8.2. |
| @pdfme/common before 5.5.10 contains a server-side request forgery vulnerability in the getB64BasePdf function that fetches arbitrary URLs without validation when basePdf is attacker-controlled. Attackers who control the basePdf template field can force servers or clients to make requests to internal endpoints, enabling metadata exfiltration, network reconnaissance, and blind request forgery attacks. |
