| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix num_ops off-by-one when crypto allocation fails
move_dirty_folio_in_page_array() may fail if the file is encrypted, the
dirty folio is not the first in the batch, and it fails to allocate a
bounce buffer to hold the ciphertext. When that happens,
ceph_process_folio_batch() simply redirties the folio and flushes the
current batch -- it can retry that folio in a future batch.
However, if this failed folio is not contiguous with the last folio that
did make it into the batch, then ceph_process_folio_batch() has already
incremented `ceph_wbc->num_ops`; because it doesn't follow through and
add the discontiguous folio to the array, ceph_submit_write() -- which
expects that `ceph_wbc->num_ops` accurately reflects the number of
contiguous ranges (and therefore the required number of "write extent"
ops) in the writeback -- will panic the kernel:
BUG_ON(ceph_wbc->op_idx + 1 != req->r_num_ops);
This issue can be reproduced on affected kernels by writing to
fscrypt-enabled CephFS file(s) with a 4KiB-written/4KiB-skipped/repeat
pattern (total filesize should not matter) and gradually increasing the
system's memory pressure until a bounce buffer allocation fails.
Fix this crash by decrementing `ceph_wbc->num_ops` back to the correct
value when move_dirty_folio_in_page_array() fails, but the folio already
started counting a new (i.e. still-empty) extent.
The defect corrected by this patch has existed since 2022 (see first
`Fixes:`), but another bug blocked multi-folio encrypted writeback until
recently (see second `Fixes:`). The second commit made it into 6.18.16,
6.19.6, and 7.0-rc1, unmasking the panic in those versions. This patch
therefore fixes a regression (panic) introduced by cac190c7674f. |
| FastNetMon Community Edition through 1.2.9 contains an integer overflow vulnerability in the packet capture buffer allocation. In src/packet_storage.hpp, the allocate_buffer() function computes memory_size_in_bytes as 'buffer_size_in_packets * (max_captured_packet_size + sizeof(fastnetmon_pcap_pkthdr_t)) + sizeof(fastnetmon_pcap_file_header_t)' using unsigned int (32-bit) arithmetic. With max_captured_packet_size=1500 and sizeof(fastnetmon_pcap_pkthdr_t)=16, each packet requires approximately 1516 bytes. If buffer_size_in_packets exceeds approximately 2,832,542, the multiplication overflows, resulting in a much smaller allocation than expected. Subsequent write_packet() calls then write past the allocated buffer, causing heap corruption. The buffer_size_in_packets value is derived from the ban_details_records_count configuration parameter, which is parsed using atoi() with no overflow checking. |
| smallbitvec is a growable bit-vector for Rust, optimized for size. From 1.0.1 to 2.6.0, an integer overflow in the internal capacity calculation of smallbitvec can lead to an undersized heap allocation, resulting in a heap buffer overflow through safe APIs only. This allows memory corruption without requiring unsafe code from the caller. This vulnerability is fixed in 2.6.1. |
| FastNetMon Community Edition through 1.2.9 contains an off-by-one heap-based buffer overflow in the dynamic_binary_buffer_t class (src/dynamic_binary_buffer.hpp). Five methods (append_dynamic_buffer, append_data_as_pointer, append_data_as_object_ptr, memcpy_from_ptr, memcpy_from_object_ptr) use an incorrect bounds check of the form 'if (offset + length > maximum_internal_storage_size + 1)' instead of the correct 'if (offset + length > maximum_internal_storage_size)'. This allows writing exactly one byte past the end of the heap-allocated buffer. The class is used pervasively in BGP message encoding/decoding, NetFlow template processing, and Flow Spec NLRI construction. An attacker who can send network traffic (NetFlow, sFlow, IPFIX, or BGP) to a FastNetMon instance can trigger this overflow, potentially achieving arbitrary code execution by corrupting heap metadata. Notably, the append_byte() method uses the correct bounds check, confirming the inconsistency. |
| In Arm ArmNN through 2026-03-27, an integer overflow in TensorShape::GetNumElements() in armnn/Tensor.cpp allows a crafted TFLite model file to bypass buffer size validation and trigger a heap-based buffer over-read during model optimization. The overflow occurs when multiplying tensor dimensions using 32-bit unsigned arithmetic without overflow detection, causing GetNumBytes() to return an understated allocation size. During Optimize()->InferOutputShapes(), the BatchToSpaceNdLayer reads beyond the allocated buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: check for zero length in DecodeQ931()
In DecodeQ931(), the UserUserIE code path reads a 16-bit length from
the packet, then decrements it by 1 to skip the protocol discriminator
byte before passing it to DecodeH323_UserInformation(). If the encoded
length is 0, the decrement wraps to -1, which is then passed as a
large value to the decoder, leading to an out-of-bounds read.
Add a check to ensure len is positive after the decrement. |
| A flaw was found in Corosync. An integer overflow vulnerability in Corosync's join message sanity validation allows a remote, unauthenticated attacker to send crafted User Datagram Protocol (UDP) packets. This can cause the service to crash, leading to a denial of service. This vulnerability specifically affects Corosync deployments configured to use totemudp/totemudpu mode. |
| A flaw was found in GIMP. This issue is a heap buffer over-read in GIMP PCX file loader due to an off-by-one error. A remote attacker could exploit this by convincing a user to open a specially crafted PCX image. Successful exploitation could lead to out-of-bounds memory disclosure and a possible application crash, resulting in a Denial of Service (DoS). |
| OpenLDAP Lightning Memory-Mapped Database (LMDB) versions up to and including 0.9.14, prior to commit 8e1fda8, contain a heap buffer underflow in the readline() function of mdb_load. When processing malformed input containing an embedded NUL byte, an unsigned offset calculation can underflow and cause an out-of-bounds read of one byte before the allocated heap buffer. This can cause mdb_load to crash, leading to a limited denial-of-service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq()
The "instance" variable needs to be signed for the error handling to work. |
| Kitty is a cross-platform GPU based terminal. In versions 0.46.2 and below, the handle_compose_command() function in kitty/graphics.c performs bounds validation on composition offsets using unsigned 32-bit arithmetic that is subject to integer wrapping, potentially leading to Heap Buffer Over-Read/Write. An attacker who can write escape sequences to a kitty terminal (e.g., via a malicious file, SSH login banner, or piped content) can supply crafted x_offset/y_offset values that pass the bounds check after wrapping but cause massive out-of-bounds heap memory access in compose_rectangles(). No user interaction is required. No non-default configuration is required. The attacker only needs the ability to produce output in a kitty terminal window. This issue has been fixed in version 0.47.0. |
| Integer overflow or wraparound in Microsoft Office allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Prevent ubuf size overflow
The ubuf size calculation may overflow, resulting in an undersized
allocation and possible memory corruption.
Use check_add_overflow() helpers to validate the size calculation before
allocation. |
| A potential security vulnerability has been identified in the HP Linux Imaging and Printing Software. This potential vulnerability may allow escalation of privileges and/or arbitrary code execution via an integer overflow in the hpcups processing path when handling crafted print data. |
| Rsync versions before 3.4.3 contain an off-by-one out-of-bounds stack write vulnerability in the establish_proxy_connection() function in socket.c that allows network attackers to corrupt stack memory by sending a malformed HTTP proxy response. Attackers can exploit this by positioning themselves between the client and proxy or controlling the proxy server to send a response line of 1023 or more bytes without a newline terminator, causing a null byte to be written to an out-of-bounds stack address when the RSYNC_PROXY environment variable is set. |
| Rsync version 3.4.2 and prior contain an integer overflow vulnerability in the compressed-token decoder where a 32-bit signed counter is not checked for overflow, allowing a malicious sender to trigger an overflow that causes the receiver process to read and return data from outside the intended buffer bounds. Attackers can exploit this vulnerability to disclose process memory contents including environment variables, passwords, heap and stack data, and library memory pointers, significantly reducing ASLR effectiveness and facilitating further exploitation. |
| pgx is a PostgreSQL driver and toolkit for Go. SQL injection can occur if an attacker can cause a single query or bind message to exceed 4 GB in size. An integer overflow in the calculated message size can cause the one large message to be sent as multiple messages under the attacker's control. The problem is resolved in v4.18.2 and v5.5.4. As a workaround, reject user input large enough to cause a single query or bind message to exceed 4 GB in size. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
This patch fixes an out-of-bounds access in ceph_handle_auth_reply()
that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In
ceph_handle_auth_reply(), the value of the payload_len field of such a
message is stored in a variable of type int. A value greater than
INT_MAX leads to an integer overflow and is interpreted as a negative
value. This leads to decrementing the pointer address by this value and
subsequently accessing it because ceph_decode_need() only checks that
the memory access does not exceed the end address of the allocation.
This patch fixes the issue by changing the data type of payload_len to
u32. Additionally, the data type of result_msg_len is changed to u32,
as it is also a variable holding a non-negative length.
Also, an additional layer of sanity checks is introduced, ensuring that
directly after reading it from the message, payload_len and
result_msg_len are not greater than the overall segment length.
BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph]
Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262
CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ceph-msgr ceph_con_workfn [libceph]
Call Trace:
<TASK>
dump_stack_lvl+0x76/0xa0
print_report+0xd1/0x620
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? kasan_complete_mode_report_info+0x72/0x210
kasan_report+0xe7/0x130
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
? ceph_handle_auth_reply+0x642/0x7a0 [libceph]
__asan_report_load_n_noabort+0xf/0x20
ceph_handle_auth_reply+0x642/0x7a0 [libceph]
mon_dispatch+0x973/0x23d0 [libceph]
? apparmor_socket_recvmsg+0x6b/0xa0
? __pfx_mon_dispatch+0x10/0x10 [libceph]
? __kasan_check_write+0x14/0x30i
? mutex_unlock+0x7f/0xd0
? __pfx_mutex_unlock+0x10/0x10
? __pfx_do_recvmsg+0x10/0x10 [libceph]
ceph_con_process_message+0x1f1/0x650 [libceph]
process_message+0x1e/0x450 [libceph]
ceph_con_v2_try_read+0x2e48/0x6c80 [libceph]
? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph]
? save_fpregs_to_fpstate+0xb0/0x230
? raw_spin_rq_unlock+0x17/0xa0
? finish_task_switch.isra.0+0x13b/0x760
? __switch_to+0x385/0xda0
? __kasan_check_write+0x14/0x30
? mutex_lock+0x8d/0xe0
? __pfx_mutex_lock+0x10/0x10
ceph_con_workfn+0x248/0x10c0 [libceph]
process_one_work+0x629/0xf80
? __kasan_check_write+0x14/0x30
worker_thread+0x87f/0x1570
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx_try_to_wake_up+0x10/0x10
? kasan_print_address_stack_frame+0x1f7/0x280
? __pfx_worker_thread+0x10/0x10
kthread+0x396/0x830
? __pfx__raw_spin_lock_irq+0x10/0x10
? __pfx_kthread+0x10/0x10
? __kasan_check_write+0x14/0x30
? recalc_sigpending+0x180/0x210
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3f7/0x610
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x385/0xda0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
[ idryomov: replace if statements with ceph_decode_need() for
payload_len and result_msg_len ] |
| go-ntlmssp is a Go package that provides NTLM/Negotiate authentication over HTTP. Prior to version 0.1.1, a malicious NTLM challenge message can causes an slice out of bounds panic, which can crash any Go process using `ntlmssp.Negotiator` as an HTTP transport. Version 0.1.1 patches the issue. |
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to version 4.2.0, the bounds check byteOffset + dataSize > fileSize uses U32 addition that wraps around on overflow. An attacker-crafted DataPacket with byteOffset=0xFFFFFF9C and dataSize=100 overflows to 0, bypassing the check entirely. The subsequent file write proceeds at the original ~4GB offset. Additionally, Svc/FileUplink/File.cpp:20-31 performs no sanitization on the destination file path. Combined, these allow writing arbitrary data to any file at any offset. The impact is arbitrary file write leading to remote code execution on embedded targets. Note that this is a logic bug. ASAN does not detect it because all memory accesses are within valid buffers — the corruption occurs in file I/O. Version 4.2.0 contains a patch. No known workarounds are available. |
