| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: do not dissect PPPoE PFC frames
RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT
RECOMMENDED for PPPoE. In practice, pppd does not support negotiating
PFC for PPPoE sessions, and the flow dissector driver has assumed an
uncompressed frame until the blamed commit.
During the review process of that commit [1], support for PFC is
suggested. However, having a compressed (1-byte) protocol field means
the subsequent PPP payload is shifted by one byte, causing 4-byte
misalignment for the network header and an unaligned access exception
on some architectures.
The exception can be reproduced by sending a PPPoE PFC frame to an
ethernet interface of a MIPS board, with RPS enabled, even if no PPPoE
session is active on that interface:
$ 0 : 00000000 80c40000 00000000 85144817
$ 4 : 00000008 00000100 80a75758 81dc9bb8
$ 8 : 00000010 8087ae2c 0000003d 00000000
$12 : 000000e0 00000039 00000000 00000000
$16 : 85043240 80a75758 81dc9bb8 00006488
$20 : 0000002f 00000007 85144810 80a70000
$24 : 81d1bda0 00000000
$28 : 81dc8000 81dc9aa8 00000000 805ead08
Hi : 00009d51
Lo : 2163358a
epc : 805e91f0 __skb_flow_dissect+0x1b0/0x1b50
ra : 805ead08 __skb_get_hash_net+0x74/0x12c
Status: 11000403 KERNEL EXL IE
Cause : 40800010 (ExcCode 04)
BadVA : 85144817
PrId : 0001992f (MIPS 1004Kc)
Call Trace:
[<805e91f0>] __skb_flow_dissect+0x1b0/0x1b50
[<805ead08>] __skb_get_hash_net+0x74/0x12c
[<805ef330>] get_rps_cpu+0x1b8/0x3fc
[<805fca70>] netif_receive_skb_list_internal+0x324/0x364
[<805fd120>] napi_complete_done+0x68/0x2a4
[<8058de5c>] mtk_napi_rx+0x228/0xfec
[<805fd398>] __napi_poll+0x3c/0x1c4
[<805fd754>] napi_threaded_poll_loop+0x234/0x29c
[<805fd848>] napi_threaded_poll+0x8c/0xb0
[<80053544>] kthread+0x104/0x12c
[<80002bd8>] ret_from_kernel_thread+0x14/0x1c
Code: 02d51821 1060045b 00000000 <8c640000> 3084000f 2c820005 144001a2 00042080 8e220000
To reduce the attack surface and maintain performance, do not process
PPPoE PFC frames.
[1] https://lore.kernel.org/r/20220630231016.GA392@debian.home |
| A flaw was found in libssh versions built with OpenSSL versions older than 3.0, specifically in the ssh_kdf() function responsible for key derivation. Due to inconsistent interpretation of return values where OpenSSL uses 0 to indicate failure and libssh uses 0 for success—the function may mistakenly return a success status even when key derivation fails. This results in uninitialized cryptographic key buffers being used in subsequent communication, potentially compromising SSH sessions' confidentiality, integrity, and availability. |
| JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 150.0.3. |
| In multiple functions of ubsan_throwing_runtime.cpp, there is a possible UBSan failure due to an integer overflow. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Don't allow pointer operations on unconfigured streams
When reporting the pointer for a compressed stream we report the current
I/O frame position by dividing the position by the number of channels
multiplied by the number of container bytes. These values default to 0 and
are only configured as part of setting the stream parameters so this allows
a divide by zero to be configured. Validate that they are non zero,
returning an error if not |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
The address watch clear code receives watch_id as an unsigned value
(u32), but some helper functions were using a signed int and checked
bits by shifting with watch_id.
If a very large watch_id is passed from userspace, it can be converted
to a negative value. This can cause invalid shifts and may access
memory outside the watch_points array.
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before
using it. Also use BIT(watch_id) to test and clear bits safely.
This keeps the behavior unchanged for valid watch IDs and avoids
undefined behavior for invalid ones.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448
kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow
'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c
433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd,
434 uint32_t watch_id)
435 {
436 int r;
437
438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id))
kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if
watch_id is larger than INT_MAX it leads to a buffer overflow.
(Negative shifts are undefined).
439 return -EINVAL;
440
441 if (!pdd->dev->kfd->shared_resources.enable_mes) {
442 r = debug_lock_and_unmap(pdd->dev->dqm);
443 if (r)
444 return r;
445 }
446
447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false);
--> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch(
449 pdd->dev->adev,
450 watch_id);
v2: (as per, Jonathan Kim)
- Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to
match the clear path.
- Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id(). |
| The resend_bytes function in roaming_common.c in the client in OpenSSH 5.x, 6.x, and 7.x before 7.1p2 allows remote servers to obtain sensitive information from process memory by requesting transmission of an entire buffer, as demonstrated by reading a private key. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memfd_luo: fix physical address conversion in put_folios cleanup
In memfd_luo_retrieve_folios()'s put_folios cleanup path:
1. kho_restore_folio() expects a phys_addr_t (physical address) but
receives a raw PFN (pfolio->pfn). This causes kho_restore_page() to
check the wrong physical address (pfn << PAGE_SHIFT instead of the
actual physical address).
2. This loop lacks the !pfolio->pfn check that exists in the main
retrieval loop and memfd_luo_discard_folios(), which could
incorrectly process sparse file holes where pfn=0.
Fix by converting PFN to physical address with PFN_PHYS() and adding
the !pfolio->pfn check, matching the pattern used elsewhere in this file.
This issue was identified by the AI review.
https://sashiko.dev/#/patchset/20260323110747.193569-1-duanchenghao@kylinos.cn |
| Perl versions through 5.43.10 have a heap buffer overflow when compiling regular expressions with a repeated fixed string on 32-bit builds.
Perl_study_chunk in regcomp_study.c checked the size of the joined substring buffer in characters rather than bytes. For a quantified fixed substring with a large minimum count, the byte length mincount * l could overflow SSize_t, producing an undersized SvGROW allocation; the subsequent copy writes past the end of the buffer.
A caller that compiles an attacker-controlled regular expression on a 32-bit perl build triggers a heap buffer overflow at compile time. |
| NVIDIA Display Driver for Linux contains a vulnerability where an attacker could cause an incorrect conversion between numeric types, leading to a heap buffer overflow. A successful exploit of this vulnerability might lead to denial of service, escalation of privileges, information disclosure, data tampering, and code execution. |
| In Arm ArmNN through 2026-03-27, an integer overflow in TensorShape::GetNumElements() in armnn/Tensor.cpp allows a crafted TFLite model file to bypass buffer size validation and trigger a heap-based buffer over-read during model optimization. The overflow occurs when multiplying tensor dimensions using 32-bit unsigned arithmetic without overflow detection, causing GetNumBytes() to return an understated allocation size. During Optimize()->InferOutputShapes(), the BatchToSpaceNdLayer reads beyond the allocated buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp()
sip_help_tcp() parses the SIP Content-Length header with
simple_strtoul(), which returns unsigned long, but stores the result in
unsigned int clen. On 64-bit systems, values exceeding UINT_MAX are
silently truncated before computing the SIP message boundary.
For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32,
causing the parser to miscalculate where the current message ends. The
loop then treats trailing data in the TCP segment as a second SIP
message and processes it through the SDP parser.
Fix this by changing clen to unsigned long to match the return type of
simple_strtoul(), and reject Content-Length values that exceed the
remaining TCP payload length. |
| Smart contract Marginal v1 performs unsafe downcast, allowing attackers to settle a large debt position for a negligible asset cost. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Use u32 for non-negative values in ceph_monmap_decode()
This patch fixes unnecessary implicit conversions that change signedness
of blob_len and num_mon in ceph_monmap_decode().
Currently blob_len and num_mon are (signed) int variables. They are used
to hold values that are always non-negative and get assigned in
ceph_decode_32_safe(), which is meant to assign u32 values. Both
variables are subsequently used as unsigned values, and the value of
num_mon is further assigned to monmap->num_mon, which is of type u32.
Therefore, both variables should be of type u32. This is especially
relevant for num_mon. If the value read from the incoming message is
very large, it is interpreted as a negative value, and the check for
num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to
allocate a very large chunk of memory for monmap, which will most likely
fail. In this case, an unnecessary attempt to allocate memory is
performed, and -ENOMEM is returned instead of -EINVAL. |
| Netatalk 2.1.0 through 4.4.2 combines multiple errno values using bitwise OR, resulting in incorrect error codes when multiple error conditions occur simultaneously, which may allow a remote attacker to cause a minor service disruption via conditions that trigger incorrect error-handling paths. |
| An incorrect calculation in the hextoint macro in Netatalk 2.0.0 through 4.4.2 due to improper uppercase character handling allows a remote authenticated attacker to cause limited data modification via crafted hexadecimal input. |
| Ledger Bitcoin app versions 2.1.0 and 2.1.1 contain an address derivation vulnerability that allows attackers to cause incorrect Bitcoin addresses to be displayed by exploiting improper handling of miniscript policies containing the a: fragment. Attackers can craft malicious miniscript policies that cause the device to derive and display incorrect receiving addresses, potentially leading to funds being sent to unintended addresses. |
| ZEBRA is a Zcash node written entirely in Rust. Prior to version 4.4.0, Zebra's block validator undercounts transparent signature operations against the 20000-sigop block limit (MAX_BLOCK_SIGOPS), allowing it to accept blocks that zcashd rejects with bad-blk-sigops. A miner who produces such a block can split the network: Zebra nodes follow the offending chain while zcashd nodes do not. This issue has been patched in version 4.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject mismatching sum of field_len with set key length
The field length description provides the length of each separated key
field in the concatenation, each field gets rounded up to 32-bits to
calculate the pipapo rule width from pipapo_init(). The set key length
provides the total size of the key aligned to 32-bits.
Register-based arithmetics still allows for combining mismatching set
key length and field length description, eg. set key length 10 and field
description [ 5, 4 ] leading to pipapo width of 12. |
| Issue summary: A bug has been identified in the processing of key and
initialisation vector (IV) lengths. This can lead to potential truncation
or overruns during the initialisation of some symmetric ciphers.
Impact summary: A truncation in the IV can result in non-uniqueness,
which could result in loss of confidentiality for some cipher modes.
When calling EVP_EncryptInit_ex2(), EVP_DecryptInit_ex2() or
EVP_CipherInit_ex2() the provided OSSL_PARAM array is processed after
the key and IV have been established. Any alterations to the key length,
via the "keylen" parameter or the IV length, via the "ivlen" parameter,
within the OSSL_PARAM array will not take effect as intended, potentially
causing truncation or overreading of these values. The following ciphers
and cipher modes are impacted: RC2, RC4, RC5, CCM, GCM and OCB.
For the CCM, GCM and OCB cipher modes, truncation of the IV can result in
loss of confidentiality. For example, when following NIST's SP 800-38D
section 8.2.1 guidance for constructing a deterministic IV for AES in
GCM mode, truncation of the counter portion could lead to IV reuse.
Both truncations and overruns of the key and overruns of the IV will
produce incorrect results and could, in some cases, trigger a memory
exception. However, these issues are not currently assessed as security
critical.
Changing the key and/or IV lengths is not considered to be a common operation
and the vulnerable API was recently introduced. Furthermore it is likely that
application developers will have spotted this problem during testing since
decryption would fail unless both peers in the communication were similarly
vulnerable. For these reasons we expect the probability of an application being
vulnerable to this to be quite low. However if an application is vulnerable then
this issue is considered very serious. For these reasons we have assessed this
issue as Moderate severity overall.
The OpenSSL SSL/TLS implementation is not affected by this issue.
The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this because
the issue lies outside of the FIPS provider boundary.
OpenSSL 3.1 and 3.0 are vulnerable to this issue. |
