| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing release of memory after effective lifetime in Active Directory Domain Services allows an unauthorized attacker to deny service over a network. |
| Missing release of memory after effective lifetime in Windows DHCP Client allows an unauthorized attacker to deny service over an adjacent network. |
| Missing release of memory after effective lifetime in Windows TCP/IP allows an unauthorized attacker to deny service over a network. |
| Missing release of memory after effective lifetime in Windows DHCP Server allows an authorized attacker to deny service over a network. |
| Missing release of memory after effective lifetime in Windows DHCP Server allows an authorized attacker to deny service over an adjacent network. |
| Missing release of memory after effective lifetime in Windows DHCP Server allows an unauthorized attacker to deny service over a network. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to cause a denial of service due to a memory leak. |
| Protocol::HTTP2 versions before 1.14 for Perl allow memory exhaustion via closed streams that stream_state never removes from the connection stream table.
When a stream reaches the CLOSED state, stream_state returns the concurrency slot and clears most of the stream's keys, but the entry itself stays in the connection stream table and nothing in the distribution removes it. Stream identifiers increase monotonically, so a peer can open and close streams on one connection indefinitely, each close leaving a residual entry that is retained for the life of the connection.
SETTINGS_MAX_CONCURRENT_STREAMS does not bound this. That setting caps how many streams are live at once and is enforced, while the growth is made of streams the cap has already released, so it accumulates with concurrency never exceeding one. The client keeps the same table and grows the same way against a hostile server.
Measured against a server built on this module, roughly 920 bytes are retained per closed stream for about 19 bytes on the wire, so 100,000 sequential streams on one connection grow server resident memory by about 88 MiB. The streams are ordinary requests that the application accepts and completes. |
| rpcapd can allocate up to 65536 bytes per each RPCAP_MSG_UPDATEFILTER_REQ or RPCAP_MSG_STARTCAP_REQ message received from the client, but it never frees the memory, so it leaks memory even under normal use. A malicious client can cause the server to leak memory substantially faster. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
For NFT_FIB_RESULT_OIFNAME the destination register is declared with
len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail,
RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one
register via "*dest = 0". The remaining three registers are left as
whatever was on the stack in nft_do_chain()'s struct nft_regs, and a
downstream expression that loads the register span can leak that
uninitialised kernel stack to userspace.
The NFTA_FIB_F_PRESENT existence check has the same shape: it is only
meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type
while the eval stores a single byte via nft_reg_store8(), leaving the rest
of the declared span stale.
Fix both:
- replace the bare "*dest = 0" in the eval with nft_fib_store_result(),
which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already
used on the other early-return path), and
- restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its
destination as a single u8, so the marked span matches the one byte
the eval writes. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: validate Rock Ridge CE continuation extent against volume size
rock_continue() reads rs->cont_extent verbatim from the Rock Ridge CE
record and passes it to sb_bread() without checking that the block
number is within the mounted ISO 9660 volume. commit e595447e177b
("[PATCH] rock.c: handle corrupted directories") added cont_offset
and cont_size rejection for the CE continuation but did not validate
the extent block number itself. commit f54e18f1b831 ("isofs: Fix
infinite looping over CE entries") later capped the CE chain length
at RR_MAX_CE_ENTRIES = 32 but again left the block number unchecked.
With a crafted ISO mounted via udisks2 (desktop optical auto-mount)
or via CAP_SYS_ADMIN mount, rs->cont_extent can therefore point at
an out-of-range block or at blocks belonging to an adjacent
filesystem on the same block device. sb_bread() on an out-of-range
block returns NULL cleanly via the block layer EIO path, so there
is no memory-safety violation. For in-range reads of adjacent-
filesystem data, the CE buffer is parsed as Rock Ridge records and
only the text of SL sub-records reaches userspace through
readlink(), which makes the info-leak channel narrow and difficult
to exploit; still, rejecting the malformed CE outright matches the
rejection shape already present in the same function for
cont_offset and cont_size.
Add an ISOFS_SB(sb)->s_nzones bounds check to rock_continue() next
to the existing offset/size rejection, printing the same
corrupted-directory-entry notice. |
| In the Linux kernel, the following vulnerability has been resolved:
thermal: core: Fix thermal zone governor cleanup issues
If thermal_zone_device_register_with_trips() fails after adding
a thermal governor to the thermal zone being registered, the
governor is not removed from it as appropriate which may lead to
a memory leak.
In turn, thermal_zone_device_unregister() calls thermal_set_governor()
without acquiring the thermal zone lock beforehand which may race with
a governor update via sysfs and may lead to a use-after-free in that
case.
Address these issues by adding two thermal_set_governor() calls, one to
thermal_release() to remove the governor from the given thermal zone,
and one to the thermal zone registration error path to cover failures
preceding the thermal zone device registration. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm_user: fix info leak in build_mapping()
struct xfrm_usersa_id has a one-byte padding hole after the proto
field, which ends up never getting set to zero before copying out to
userspace. Fix that up by zeroing out the whole structure before
setting individual variables. |
| In the Linux kernel, the following vulnerability has been resolved:
nf_tables: nft_dynset: fix possible stateful expression memleak in error path
If cloning the second stateful expression in the element via GFP_ATOMIC
fails, then the first stateful expression remains in place without being
released.
unreferenced object (percpu) 0x607b97e9cab8 (size 16):
comm "softirq", pid 0, jiffies 4294931867
hex dump (first 16 bytes on cpu 3):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
backtrace (crc 0):
pcpu_alloc_noprof+0x453/0xd80
nft_counter_clone+0x9c/0x190 [nf_tables]
nft_expr_clone+0x8f/0x1b0 [nf_tables]
nft_dynset_new+0x2cb/0x5f0 [nf_tables]
nft_rhash_update+0x236/0x11c0 [nf_tables]
nft_dynset_eval+0x11f/0x670 [nf_tables]
nft_do_chain+0x253/0x1700 [nf_tables]
nft_do_chain_ipv4+0x18d/0x270 [nf_tables]
nf_hook_slow+0xaa/0x1e0
ip_local_deliver+0x209/0x330 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix memory leaks in beacon template setup
The functions ath11k_mac_setup_bcn_tmpl_ema() and
ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates
but fail to free it when parameter setup returns an error.
Since beacon templates must be released during normal execution, they
must also be released in the error handling paths to prevent memory
leaks.
Fix this by using unified exit paths with proper cleanup in the respective
error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req()
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: fdp: bound the device-reported read length and fix an skb leak
fdp_nci_i2c_read() takes the next packet length from two device-supplied
bytes and never validates it. The value is a u16 used as the
i2c_master_recv() count into a 261-byte on-stack buffer: a malicious,
counterfeit or malfunctioning controller (or an i2c bus interposer) can
drive it far past the buffer for a stack out-of-bounds write that
clobbers the canary and return address, or below the minimum frame size
(directly, or by truncating the computed sum) so the header/LRC strip
and the next length read run past a short receive. Reject a length
outside [FDP_NCI_I2C_MIN_PAYLOAD, FDP_NCI_I2C_MAX_PAYLOAD], as a
corrupted packet already is, and force resynchronization.
The same loop allocates one data skb per iteration and assumes a length
packet followed by a data packet; a device that sends two data packets
in one call leaks the first skb when the second allocation overwrites
it. Free a previously allocated skb before allocating the next. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix sync entry leak on OA config emit failure
xe_oa_emit_oa_config() releases the sync entries and the syncs array
only on its success path. When it fails before the point of no return
(fence allocation, config buffer allocation or batch submission), it
returns without touching stream->syncs.
The stream open path handles such failures in the caller, but
xe_oa_config_locked() propagates the error without any cleanup, so the
syncs array and the fence references held by the parsed entries are
leaked. The next config ioctl overwrites stream->syncs, making the
memory unreachable for good.
Clean up the parsed syncs when xe_oa_emit_oa_config() fails, matching
the cleanup done by the stream open error path.
(cherry picked from commit 8af97b3da2cfce04e6b457c6eb17ed3c1daf912b) |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: purge fragmented skbs during cleanup
pn53x_common_clean() purges resp_q before freeing the common PN533 state,
but it leaves fragment_skb untouched. The fragmentation helpers queue
transmit fragments there while sending large initiator or target-mode
frames, and those skbs remain owned by the driver until they are sent or
discarded.
If the device is removed while fragments are still queued, the common
cleanup path frees the PN533 state without releasing the queued fragment
skbs, leaking them.
Purge fragment_skb during cleanup alongside resp_q. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cmd: fix iovec leak when the async cmd is not recycled
An io_async_cmd carries an iovec array in ->vec.iovec, allocated when the
vec has to grow and kept across recycling through ctx->cmd_cache. On two
paths nothing frees it and io_clean_op()'s kfree(req->async_data) drops
the io_async_cmd without it.
io_req_uring_cleanup() clears the async data flags only when
io_alloc_cache_put() succeeds, and the cache holds IO_ALLOC_CACHE_MAX ==
128 entries, so once it is full the put fails and the vec is left behind.
An NVMe passthrough workload gets there without doing anything unusual:
nvme_uring_cmd_io() returns -EIOCBQUEUED, so the io_async_cmd stays
attached for the lifetime of the command and the live object count tracks
the queue depth. Above 128 the puts start failing.
->cleanup is the last chance to free an inherited vec, since
io_req_uring_cleanup() returns early for an io-wq issued command and is
not called at all for one completed without ever being issued. But
io_clean_op() calls ->cleanup only if REQ_F_NEED_CLEANUP is set, and for
uring_cmd that happens only where the vec has to grow, so a command
reusing a large enough cached vec never sets it. io_rw_alloc_async() and
io_msg_alloc_async() flag an inherited vec for exactly this reason;
io_uring_cmd_prep() does not.
Flag an inherited vec in io_uring_cmd_prep(), and free the vec when the
cache put fails, as io_req_rw_cleanup() does.
The leak is invisible under KASAN, where io_alloc_cache_vec_kasan() frees
the vec unconditionally. |
